Automatic Tube Burner 1213D

4 programming stations
The feed is 12 tubes
divided into 12 tubes OK and 1 tube NG

When you burn chips, you need a reliable and affordable automation system. The automatic burner 1213D is a classic design to meet strict programming requirements. 1213D supports tube-mounted input and tube-mounted output. Four chips can be programmed at one time, 12 tubes are fed in and 13 tubes are discharged, fully intelligent display, and 3000 chips are burned per hour, which saves a lot of cost.
1、The feed is 12 tubes, and there are 4 programming stations. After the programming.
the output is divided into 12 tubes OK and 1 tube NG.
2、During the programming process, the lC is automatically judged as OK or NG, andthe lC is automatically discharged to the discharge tube.
3、For different package quantities, you can set the number of lCs filled in each tube.
4、Automatically record the number of OK and NG of the programmed ic. This data will notbe lost even if the power is turned off.
5、Supports commercially available offline programming programmers or self-made pro.
grammers.
6、The equipment only uses power and does not require an air source.

Output efficiency	3000UPH
Host size	460X410X730MM (length x width x height)
Support IC packaging	SOP150(SSOP150)/SOP210(SSOP210)/SOP300/DIP300
Burning station	4 stations (probe)
Air	10-95% (no condensation)
Feeding method	Automatic material collection 12 tubes
Receiving method	Automatically collect 12 tubes, 1 of which is NG
User Interface	LCD
control method	Embedded control panel
Input voltage	AC220/50ZHz
power	0.18KW
weight	26KG
Support burner	Shengsi, Xinsheng, Jiuqi, Hetai, Yingguang, Yijiang, Zhongwei...